Peningkatan Mutu Pelayanan Kesehatan Di Rumah Sakit Dengan Metode Six Sigma : Literature Review
DOI:
https://doi.org/10.59841/an-najat.v1i2.33Keywords:
Health Services, Quality Improvement, Six SigmaAbstract
High service quality is the most important factor to achieve optimal health service quality. The causes of low service quality include the influence of input factors, such as lack of infrastructure, finance, facilities, and human resources. Six sigma is used to improve quality, that contains a process of measurement, investigation, analysis, and evaluation. This study used the Systematic Literature Review (SLR) method or literature study. The secondary data used comes from literary sources in the form of scientific articles in Indonesian through an online site in the form of Google Scholar. Basically the principle of Six Sigma leads to improvement of results by making improvements to the process stages so as to produce a perfect product. Six Sigma is used to identify matters relating to errors or mistakes and to rework a product/service which in turn will spend more money and time. The success of implementing Six Sigma in an organization is measured based on the achieved sigma value. Based on the analysis conducted, it can be concluded that there has been an increase in the quality of health services in hospitals using the Six Sigma method. The application of the six sigma method has a significant impact on infection prevention and control in hospitals.
References
Arifin, Alwi, Darmawansyah, & A.T.S. Ilma S. (2011). Analisis Mutu Pelayanan Kesehatan Ditinjau dari Aspek Input Rumah Sakit di Instalasi Rawat Inap RSU Haji Makassar. Jurnal MKMI, Vol 7 No. 1.
Azwar, A.H. (1996). Menjaga Mutu Pelayanan Kesehatan. Jakarta: Pustaka Sinar Harapan.
Cahyaningrum, I. (2012). Pengaruh Mutu Pelayanan Kesehatan Terhadap Kepuasan pasien Rawat Jalan Poliklinik Umum Peserta PKMS (Pemeliharaan Kesehatan Masyarakat Surakarta) Di RSUD Kota Surakarta (Doctoral dissertation, Universitas Muhammadiyah Surakarta).
Cahyono, B. (2008). Membangun Budaya Keselamatan Pasien Dalam Praktik Kedokteran. Yogyakarta: Penerbit Kanisius.
Elawati, D., & Pujiyanto, P. (2022). Pengaruh Implementasi Lean Hospital terhadap Length of Stay di Rumah Sakit: Scoping Review. Jurnal Pendidikan Tambusai, 6(2), 11744-11755. https://doi.org/10.31004/jptam.v6i2.431
Kemenkes RI. (2020). Peraturan Menteri Kesehatan Republik Indonesia Nomor 3 Tahun 2020 Tentang Klasifikasi Dan Perizinan Rumah Sakit. PMK_No__3_Th_2020_ttg_Klasifikasi_dan_Perizinan_Rumah_Sakit.pdf (kemkes.go.id)
Muninjaya. (2013). Manajemen Mutu Pelayanan Kesehatan. Jakarta: Penerbit EGC
Mu’tiyah, I., & Oktamianti, P. (2022). Meningkatkan Kinerja Ruang Operasi dengan Metode Lean Six Sigma: Literature Review. Media Publikasi Promosi Kesehatan Indonesia (MPPKI), 5(12), 1513-1519. https://doi.org/10.56338/mppki.v5i12.2745
Pribadi, F. J., & Ratnawati, T. (2020). Analisis Modeling Lean Management dalam Upaya Meningkatkan Mutu Kinerja Operasional Rumah Sakit Pemerintah. Jurnal Ekonomi Akuntansi, 5(2), 84-103.
Putra, P. A., Ngurah, G., Suryanata, P., & Manajemen, M. (2021). Sinergi Halodoc Dalam Mutu Pelayanan Rumah Sakit Di Masa Pandemi Covid 19. E-Jurnal Ekonomi Dan Bisnis Universitas Udayana, 10(04), 211–222. https://ojs.unud.ac.id/index.php/EEB/index
Putri, E. I. P. S. (2015). Analisis Lean Six Sigma Perbekalan Farmasi di Gudang Farmasi RS PMI Bogor Tahun 2013. Jurnal Administrasi Kebijakan Kesehatan Nomor 2, Volume 1.
Rokom. (2021). Kenyamanan dan Fasilitas Layanan Medis di RS, Bantu Percepat Kesembuhan Pasien. Kenyamanan dan Fasilitas Layanan Medis di RS, Bantu Percepat Kesembuhan Pasien – Sehat Negeriku (kemkes.go.id)
Sartin. (2012). Penerapan Fuzzy Multi Objective Linear Programming pada Perencanaan Agregat Produksi, Prosiding Seminar Nasional Aplikasi Sains & Teknologi (SNAST) Periode III, hlm. A-144 – A-156.
Simanjuntak, E. C. (2019). Pelayanan Perawat Yang Berkualitas Dalam Rangka Tercapainya Keselamatan Pasien.
Sinaga, R. (2017). The Quality Of Brick Products In Brick Production Process Using Six-Sigma Method At A Brick Factory In Deli Serdang Regency Risma Sinaga. Am. J. Eng. Res, 6(10), 14.
Soemohadiwidjojo, A. T. (2017). Six Sigma Metode Pengukuran Kinerja Perusahaan Berbasis Statistik. Jakarta: Raih Asa Sukses. Six Sigma Metode Pengukuran Kinerja Perusahaan Berbasis Statistik - Arini T. Soemohadiwidjojo - Google Books
Sunaringtyas, Rachmawati. (2014). Studi Kualitas Pelayanan Rawat Inap Rumah Sakit dengan Menggunakan Metode Six Sigma. Jurnal MHB, Volume 2.
Supriyanto, S., & Wulandari, R. D. (2011). Health Service Quality Management. Surabaya Health Advocacy, Surabaya.
Surwani, S., & Novemberina, M. (2019). Six Sigma untuk Perbaikan Layanan Resep di RS X Kota Semarang. Parapemikir J. Ilm. Farm, 8(2). pp 89-85. https://core.ac.uk/download/pdf/276528026.pdf
Waluyo, W., Sholihin, S., Permana, R. A., Firmanti, T. A., & Permatasari, Y. I. (2020). Penerapan Metode Six Sigma dalam Pencegahan dan Pengendalian Infeksi di Rumah Sakit: A Systematic Review. Jurnal Penelitian Kesehatan “SUARA FORIKES” (Journal of Health Research “Forikes Voice”), 11(1), 108. https://doi.org/10.33846/sf11123
