Pengaruh Perubahan Sudut Kemiringan Squish Head terhadap Kompresi dan Torsi pada Sepeda Motor 160cc

Aviv Rahmadillah; Purwoko Purwoko

doi:10.59841/intellektika.v2i5.1652

Authors

Aviv Rahmadillah Politeknik Negeri Malang
Purwoko Purwoko Politeknik Negeri Malang

DOI:

https://doi.org/10.59841/intellektika.v2i5.1652

Keywords:

squish head, compression, torque

Abstract

This research is to direct the mixture of air and fuel exactly to the top of the midpoint of the dome in the cylinder head. In addition, Squish Head also determines the character of the motorcycle. Moreover, what is very prominent in the initial pull is that if the compression ratio is denser, the pull is lighter. This study aims to determine the effect of changes in the slope angle of the squish head of 15, 17 and 19 degrees on compression and torque. In this study, experimental research is used with a quantitative method, where information that can be calculated and measured is factual because it is in the form of numbers. Researchers to get the data will conduct tests using the dynotest tool. Changes in the slope of the squish head have an effect on the torque. At an angle of 15 degrees, torque is produced at 9.91 N.m at 6000 RPM engine rotation. Then at an angle slope of 17 degrees, the torque increases by 0.14 N.m to 10.05 N.m at 6000 RPM engine rotation. At an angle of 19 degrees, the torque increases by 0.17 N.m to 10.22 N.m at 6000 rpm.

References

Fathi, A., & Sharaf, S. (2018). Effect of cylinder head squish design on engine performance and emissions. Journal of Engine Research and Development, 12(2), 153-164.

Hidayat, H., & Putra, R. M. (2015). Analysis of compression ratio and squish design on motorcycle engine performance. Jurnal Teknik Mesin dan Otomotif, 11(3), 77-85.

Jang, J. H., & Lee, H. S. (2020). Optimization of squish geometry for enhanced engine efficiency. International Journal of Mechanical Engineering and Applications, 8(4), 22-29.

Kumar, S., & Singh, R. (2019). Impact of cylinder head modification on torque and power output of 4-stroke engines. SAE Technical Paper Series, 2019-01-1423.

Peters, M. A., & Cook, A. L. (2021). The effect of squish area and compression ratio on engine performance. Journal of Automotive Technology and Management, 23(1), 45-56.

Prastika, I. G. E. J., Wigraha, N. A., & Nugraha, I. N. P. (2018). Pengaruh perubahan bentuk squish (sudut kepala silinder) terhadap torsi dan daya pada sepeda motor konvensional. Jurnal Teknik Mesin Universitas Pendidikan Ganesha, 3(November).

Ryanto, N. A., Agus, N., Wigraha, N. A., Dantes, & Rihendra, K. (2018). Pengaruh pemotongan permukaan penutup ruang bakar pada kepala silinder terhadap daya dan torsi pada motor Jupiter Z. Universitas Pendidikan Ganesha.

Sudarsono, S. (2011). Analisis perubahan volume pada cylinder head dan tinggi lubang exhaust terhadap kenaikan daya sepeda motor 2 langkah. Jurnal Teknologi Technoscientia, 4(1), 1-10. ISSN: 1979-8415.

Wahana Ilmuwan. (2016). Pengaruh perubahan celah katup hisap dan katup buang terhadap performance motor Jupiter Z 2004 menggunakan bahan bakar biopremium E10. Wahana Ilmuwan, 1(1).

Yoshida, M., & Kanno, S. (2018). Effects of squish geometry and compression ratio on engine efficiency. International Journal of Engine Research, 19(6), 905-917.

Zhang, Y., & Chen, H. (2022). Analysis of squish area influence on engine torque and power. Proceedings of the ASME Internal Combustion Engine Division, 6(1), 137-146.